Products

Plastic Injection Machine

Model:

Categories: Blow Molding Machine » Plastic Injection Machine »

Description:

Features:
The automatic injection molding machine is used to produce of faster speed, higher precision, and outstanding performance versus cost ratio. The machine can meet a majority of precisions' requirements, and can produce products with superior exterior and high quality, shch as electron, computer, mobile phone, automobile parts, high-class household electrical appliances, container and so on.
The whole line includes the following systems: injecton systeml; hydraulic system, electrical system, clamping system, and etc.
This line has been exported to many countries including Russia with very stable quality and good Requtation.
Technical Specifications:

Model		L-BW50			L-BW80			L-BW110			L-BW120			L-BW130
Screw Code	-	A	B	C	A	B	C	A	B	C	A	B	C	A	B	C
Screw Diameter	mm	25	28	30	32	35	38	38	40	42	38	40	42	40	42	45
Injection Pressure	Mpa	184	168	147	186	170	144	188	168	152	187	170	154	190	174	151
Shot Weight (PS)	g	45	53	61	90	100	130	132	158	175	170	183	208	200	224	257
Screw L:D	-	22:1	20:1	18:1	21:1:6:1	20:5:1	19:3:1	22:1	20:1	18:1	22:1	20:1	18:1	22:1:1	20:1	18:1
Screw Stroke	mm	102			135			150			170			191
Screw Speed	r.p.m	0-320			0-200			5-180			10-170			5-170
Injection Rate	cm³/sec	24.5	32.4	40	78	90	20-60	116	120	122	118	122	124	119	123	125
Plasticizing Capacity	g/sec	4	4.5	5.2	9.8	14	18	19.3	20.2	22.3	19.2	20.1	22	20	21	22.5
Type Of Clamping Units	-
Clamping Force	tons	50			80			110			120			130
Mould Clamping Stroke	mm	255			300			320			375			375
Max Daylight Opening	mm	605			650			700			775			805
Mould Thickness(Min-Max)	mm	150-350			130-350			150-380			150-400			150-430
Space Between Tie Bar(W×H)	mm	280×260			350×350			385×350			375×415			420×420
Hydraulic Ejection Force	tons	2.2			2.7			3.0			3.8			3.8
Hydraulic Ejection Stroke	mm	65			100			80			110			115
System Pressure	Mpa	14			14			16			16			16
Pump Driving Motor	Kw	5.5			9			11			13			13
Heater Capacity	Kw	2.3			6			6.3			6.3			6.3
Temperature Control Zones	-	3+1			3+1			3+1			3+1			3+1
Tank Capacity	L	160			180			180			220			220
Machine Dimension(L×W×H)	mm	3600×1100 ×1700			3800×1200 ×1700			3850×1260 ×1780			3940×1280 ×1795			4150×1290 ×1800
Machine Weight	tons	2.8			3			3.5			4.2			4.5
When PC(polycarbonate), PVC and other plastic material used for engineering are planned for molding, it is necessary to inform us for special designation.

Model		L-BW170			L-BW220			L-BW280			L-BW380
Screw Code	-	A	B	C	A	B	C	A	B	C	A	B	C
Screw Diameter	mm	42	45	50	48	52	55	55	60	65	65	70	75
Injection Pressure	Mpa	225	188	158	211	180	160.8	216	182	155	218	185	156
Shot Weight (PS)	g	287	320	407	432	510	570	654	779	890	966	1120	1286
Screw L:D	-	22:1	20:1	18:1	22:1	20:1	18:1	22:1	20:1	18:4:1	21:6:1	20:1	19:1
Screw Stroke	mm	245			281			322			315
Screw Speed	r.p.m	0-170			0-170			0-160			5-200
Injection Rate	cm³/sec	120	125	130	136	168	203	207	246	270	275	318	365
Plasticizing Capacity	g/sec	20	22.7	23	20	25	30	30	36	40	45	52	60
Type Of Clamping Units	-
Clamping Force	tons	170			220			280			380
Mould Clamping Stroke	mm	435			470			550			680
Max Daylight Opening	mm	935			1050			1170			1400
Mould Thickness (Min-Max)	mm	180-500			200-500			230-620			250-720
Space Between Tie Bar(W×H)	mm	460×460			510×510			580×580			710×710
Hydraulic Ejection Force	tons	4.5			7.0			7.0			11
Hydraulic Ejection Stroke	mm	130			135			145			200
System Pressure	Mpa	16			16			16			16
Pump Driving Motor	Kw	15			18.5			22			37
Heater Capacity	Kw	7.5			11			14			19
Temperature Control Zones	-	3+1			4+1			4+1			5+1
Tank Capacity	L	350			400			500			1000
Machine Dimension (L×W×H)	mm	4920×1290 ×1810			5400×1550 ×1950			5800×1650 ×2050			7180×1950 ×2600
Machine Weight	tons	5.2			8.5			11			11.5
When PC(polycarbonate), PVC and other plastic material used for engineering are planned for molding, it is necessary to inform us for special designation.

Model		L-BW480			L-BW580			L-BW700			L-BW800
Screw Code	-	A	B	C	A	B	C	A	B	C	A	B	C
Screw Diameter	mm	70	75	85	75	80	85	85	90	100	90	100	110
Injection Pressure	Mpa	212	184	143	210	185	164	219	195	158	225	182	150
Shot Weight (PS)	g	1280	1469	1887	1571	1778	2018	2174	2438	3010	2702	3336	4037
Screw L:D	-	23:5:1	22:1	19:4:1	22:1	20.5:1	19.3:1	21:1	20:1	18:1	22:1	20:1	18:1
Screw Stroke	mm	360			385			415			460
Screw Speed	r.p.m	5-150			5-130			5-120			5-130
Injection Rate	cm³/sec	323	371	365	351	400	451	486	545	673	540	667	807
Plasticizing Capacity	g/sec	49	58	60	59	68	86	64	72	89	65	80	95.8
Type Of Clamping Units	-
Clamping Force	tons	480			580			700			800
Mould Clamping Stroke	mm	750			850			900			1000
Max Daylight Opening	mm	1550			1700			1900			2000
Mould Thickness(Min-Max)	mm	300-800			350-850			400-900			450-1000
Space Between Tie Bar(W×H)	mm	810×785			860×860			920×920			1000×1000
Hydraulic Ejection Force	tons	15			16.6			18			20
Hydraulic Ejection Stroke	mm	200			250			285			260
System Pressure	Mpa	17.5			16			16			16
Pump Driving Motor	Kw	18.5+30			18.5+37			37+37			37+45
Heater Capacity	Kw	24.7			28			30			36
Temperature Control Zones	-	6+1			6+1			6+1			7+1
Tank Capacity	L	950			1300			1300			1800
Machine Dimension(L×W×H)	mm	8600×2200×2400			9400×2300×2800			9700×2800×3290			10300×2700×3290
Machine Weight	tons	22			32			35			48
When PC(polycarbonate), PVC and other plastic material used for engineering are planned for molding, it is necessary to inform us for special designation.